Mohammed Salman

Mohammed Salman

Blog by Mohammed Salman

KNX Cable vs BMS Cable: Understanding the Differences for Smart Building Projects

26.08.26 01:38 PM By Mohammed Salman - Comment(s)
KNX Cable vs BMS Cable: Understanding the Differences for Smart Building Projects

Modern buildings are becoming increasingly connected. Lighting, HVAC systems, energy monitoring, security, blinds, sensors, and room controls all depend on reliable communication between multiple devices and systems. As smart building technology continues to expand, selecting the correct communicati...

Network Cables (Cat6) for Industrial & Commercial Use: What UAE Projects Should Know

18.08.26 07:40 AM By Mohammed Salman - Comment(s)
Network Cables (Cat6) for Industrial & Commercial Use: What UAE Projects Should Know
Cat6 network cables are essential for reliable connectivity across UAE commercial and industrial projects, supporting applications such as CCTV, access control, Wi-Fi, VoIP, and automation. Choosing the right cable category, shielding, conductor size, and jacket type helps ensure stable performance.

Common Cable Installation Mistakes That Cause BMS Communication Failures 

13.08.26 02:16 PM By Mohammed Salman - Comment(s)

Building Management Systems rely on efficient communication between controllers, sensors, meters, actuators, and field devices. As such, while much attention is often paid to controllers, software, and overall system configuration, the cabling is no less important. 

Improper cable selection or i...

Fire Resistant vs Fire Alarm Cables: What's the Difference and Where Each Is Required (UAE Guide)

05.08.26 01:46 PM By Mohammed Salman - Comment(s)

In case you are trying to specify cables for building works in the UAE, then you must have come across these two terminologies and presumed that both are almost synonymous. However, it is not so. The consequences of using one term in place of the other could be dire – from failing a Civil Defense in...

BMS Cable Selection Guide: Shielded vs Unshielded, and Getting the AWG Right

22.07.26 02:00 PM By Mohammed Salman - Comment(s)
BMS Cable Selection Guide: Shielded vs Unshielded, and Getting the AWG Right
This guide explains when to use shielded vs unshielded cable in BMS installations, based on signal type, cable length, and proximity to noise sources like VFDs and switchgear.

EMC Protection in BMS Cables: Why It Decides Whether Your Building Automation Actually Works 

14.07.26 09:41 AM By Mohammed Salman - Comment(s)
EMC Protection in BMS Cables: Why It Decides Whether Your Building Automation Actually Works 

Your Building Management System looks fine on paper. Sensors are wired up, controllers are programmed, and the network topology is clear. After the commissioning process, you end up with ghost signals, erratic operation of HVAC valves, or packet loss on your BACnet network each time the elevator mot...

How to Source Industrial Cables Fast in UAE Without Compromising Quality 

22.06.26 01:47 PM By Mohammed Salman - Comment(s)
How to Source Industrial Cables Fast in UAE Without Compromising Quality 

Introduction 

When you are procuring the cables for your construction, oil & gas, or infrastructure project in UAE, you are fully aware of your situation – you need the cables in time, according to specifications, and you cannot afford any risks with the quality.  

There are plenty ...

Why Modern Facilities Are Moving Beyond Traditional BMS Systems

25.05.26 09:18 AM By Mohammed Salman - Comment(s)
Why Modern Facilities Are Moving Beyond Traditional BMS Systems

For years Building Management Systemshave been the backbone of facility operations. From heating and cooling control to lighting automation traditional Building Management Systems platforms helped commercial buildings and industrial facilitie...

How BMS Cables Improve Building Automation Systems 

12.05.26 02:16 PM By Mohammed Salman - Comment(s)
How BMS Cables Improve Building Automation Systems 
This blog explains the crucial role of BMS cables in modern smart buildings and automation systems. It covers how BMS cables support seamless communication between HVAC, lighting, security, and fire safety systems while reducing signal interference and improving energy efficiency.

Choosing the Right Cable Design for Industrial and Power Applications 

06.05.26 09:19 AM By Mohammed Salman - Comment(s)
Choosing the Right Cable Design for Industrial and Power Applications 
Cable design is crucial for industrial system reliability. Choosing the right cable based on environment, movement, and load ensures durability and prevents failures.
Next
Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.